Where to find the factory keyless entry code on 08 F350?? - Page 2 - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #11 of 23 (permalink) Old 05-03-2011, 05:24 AM
PSN Local
 
Join Date: Jan 2011
Posts: 64
Re: Where to find the factory keyless entry code on 08 F350??

Quote:
Originally Posted by Dirty Curry Racing View Post
Yikes, that's a little distributing if it was that easy.
ya, but I highly doubt someone would get your vin #, call a ford dealer, get the pin, and then go back to your truck to get in... when a brick would get it done a lot quicker.

hopefully. lol.

2008 F250 Lariat
Suspension: Rancho 4"
Wheels/Tires: Diamo 17k / Toyo 35x12.5R20
Mini Maxx (Hot Damn)
Flo-Pro 4" DOC/DPF Delete
S&B CAI

TXTech11 is offline  
Sponsored Links
Advertisement
 
post #12 of 23 (permalink) Old 05-04-2011, 03:56 AM
PSN Veteran
 
scott2001's Avatar
 
Join Date: Jun 2010
Location: Alabama
Posts: 2,267
Re: Where to find the factory keyless entry code on 08 F350??

thats what insurance is for.

2008 got a new flex pipe installed. S-b intake, 4in dp back exhaust, gear head tunes All deletes done now.
flow pro hot pipe. CCV mode.

2013 dodge charger
scott2001 is offline  
post #13 of 23 (permalink) Old 05-04-2011, 06:06 PM
C10H20
 
Dirty Curry Racing's Avatar
 
Join Date: May 2010
Location: Clovis NM
Posts: 342
Re: Where to find the factory keyless entry code on 08 F350??

Quote:
Originally Posted by TXTech11 View Post
ya, but I highly doubt someone would get your vin #, call a ford dealer, get the pin, and then go back to your truck to get in... when a brick would get it done a lot quicker.

hopefully. lol.
Very true with the brick, But to play a practical joke on some buddies I know would be worth it

Rig: 2010 F250 CC SB 4x4
Tuner: H&S Mini Maxx HD300
Tuner setting: Hot
Trans Tuning: 1 shift Schedule low modifier
Curb Weight w/Driver: 8360lbs
Best 1/4 time: 13.55 @99mph with HD300 tune
Dirty Curry Racing is offline  
post #14 of 23 (permalink) Old 05-05-2011, 06:19 PM
PSN Newb
 
Join Date: Mar 2011
Location: Kalifornia
Posts: 45
Re: Where to find the factory keyless entry code on 08 F350??

I know this question has been asked in other forms. If I remember most think it is somewhere around the fuse panel or maybe under it. To change the code to a personal one, you will need the original code.

2008 FX4 SC SB 6 Speed Mini Maxx Kem tunes
Pyro2nite is offline  
post #15 of 23 (permalink) Old 05-06-2011, 01:09 PM
PSN Newb
 
Join Date: May 2011
Posts: 1
Smile Re: Where to find the factory keyless entry code on 08 F350??

I had read it was printed on the ECM?
charlie.harley is offline  
post #16 of 23 (permalink) Old 05-06-2011, 01:49 PM
Banned
 
Join Date: Mar 2011
Location: Michigan
Posts: 146
Re: Where to find the factory keyless entry code on 08 F350??

Here it is from the Ford service manual:

"Vehicles equipped with a keyless entry keypad are programmed with a factory set 5-digit entry code. This code is provided to the customer on a wallet card in the Owner Literature package. In addition, this code is available through the use of a scan tool, and is printed on the SJB label located on the back side of the module (installed position). When entering codes, each digit must be entered within 5 seconds of the previous button press."

The SJB is the fuse/relay panel in the passenger side kick panel. You will need to unbolt it and flip it over - there should be a sticker on it with your code.
mortal798 is offline  
post #17 of 23 (permalink) Old 05-06-2011, 01:52 PM
Banned
 
Join Date: Mar 2011
Location: Michigan
Posts: 146
Re: Where to find the factory keyless entry code on 08 F350??

Here are the programming instructions:

"Programming a Personal Entry Code and Keypad Association to Memory Features (If Equipped)

NOTE: The system allows 3 personal codes to be programmed.

NOTE: Multiple personal codes can be programmed in one step. When programming multiple codes in one step, each code must be programmed by entering each button within 5 seconds of each other. If 5 seconds elapse between any button press, programming mode is exited.

NOTE: If only a single personal code is desired or unable to program multiple codes in one step, each personal code can be programmed individually by repeating Steps 1-5 for each code desired.

Enter the factory set 5-digit keyless entry keypad code.

Within 5 seconds, press the 1/2 button on the keypad to activate the programming mode.

Enter the new personal 5-digit keyless entry keypad code. Each number must be entered within 5 seconds of each other.

After entering the new personal code, press a 6th button to program each new code.

Pressing 1/2 stores the first personal code (if equipped with memory, this code is associated with driver 1 settings).

Pressing 3/4 stores the second personal code (if equipped with memory, this code is associated with driver 2 settings).

Pressing 5/6, 7/8 or 9/0 stores the third personal code, but does not associate the code with a memory setting.

The door locks lock and unlock to confirm the new code is programmed.

Erasing a Personal Entry Code

Enter the factory set 5-digit keyless entry keypad code.

Within 5 seconds, press the 1/2 button on the keypad and release.

Within 5 seconds, press and hold the 1/2 button for 2 seconds.

All personal codes are now erased and only the factory set 5-digit code works."
mortal798 is offline  
post #18 of 23 (permalink) Old 05-07-2011, 03:25 AM
Banned
 
Join Date: Mar 2011
Location: Michigan
Posts: 146
Re: Where to find the factory keyless entry code on 08 F350??

Did you find it yet?
mortal798 is offline  
post #19 of 23 (permalink) Old 05-13-2011, 12:11 AM Thread Starter
GOT WOOD!!!!
 
Muzbomb's Avatar
 
Join Date: Jul 2009
Location: Alberta, Canada
Posts: 648
Re: Where to find the factory keyless entry code on 08 F350??

Hey guys i kept calling and bugging them so much that they did it for free for me They hooked the computer up and good to go. Thanks again guys

2009 F350 Lariat, 67's ceramic coated DP, Flo-Pro 5" downpipe back with6"tip, S&B Intake, Spartan, EGR delete, Icon 2.5" leveling kit with BDS trac bar, 1"TEI spacer, 5" rear blocks, Pro Comp tration bars, 20x10 Evulve chrome rims w35"Mickey Thompson MTZ, 20x8.5American Eagle rims w305/55R20 Studded Dura Trac, HID lights, Rigid 20"LED combo
Muzbomb is offline  
post #20 of 23 (permalink) Old 07-09-2012, 12:57 AM
Powerstroked
 
freddie's Avatar
 
Join Date: May 2009
Location: Lexington, OH
Posts: 602
Re: Where to find the factory keyless entry code on 08 F350??

Quote:
Originally Posted by mortal798 View Post
Here it is from the Ford service manual:

"Vehicles equipped with a keyless entry keypad are programmed with a factory set 5-digit entry code. This code is provided to the customer on a wallet card in the Owner Literature package. In addition, this code is available through the use of a scan tool, and is printed on the SJB label located on the back side of the module (installed position). When entering codes, each digit must be entered within 5 seconds of the previous button press."

The SJB is the fuse/relay panel in the passenger side kick panel. You will need to unbolt it and flip it over - there should be a sticker on it with your code.
That is the correct location for the code, in case any of you are wondering. It is in small print. Took 5 minutes to remove kick panel, un bolt the module, and turn it enough to find the code.

97 F250 CCSB
freddie is offline  
Reply
Gear in this thread - Powered by O'Reilly Auto Parts

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome