Lay off the ether. Your gonna tear something up. Fix the problem and it will start.
Its not an old IDI, if there is a problem you need to fix it first.
Check the res , replace the cps, if still no start, then get a scanner . Go from there. How cold outside there?
Cold enough to need the glow plugs? If so, then check for voltage there. But AFTER you check the res on top.
No oil = no run.
2000 f-350 cc lb dually 4x4, BTS transmission
7.85@ 90 mph on MT mud tires and 8,000 #
coming soon--97 cc lb 4x4