Wont start after taking out Hpop - PowerStrokeNation : Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 21 (permalink) Old 08-09-2010, 09:42 PM Thread Starter
PSN Local
 
TimmyNiewald11's Avatar
 
Join Date: Feb 2010
Location: Imperial, MO
Posts: 76
Wont start after taking out Hpop

i took out my hpop to replace the seal on the drive gear and put it all back together from the hpop up with new seals. but now it wont start i purged all the air out of the lines and put more oil in the rail below the icp and on the passenger side. but it still wont run i checked all my connections and they are all clean and snug besides the one to heat my fuel bowl. does that one matter??? the truck runs on either(i know big no no) but it wont start on its own i also replaced the cps. anymore ideas?
TimmyNiewald11 is offline  
Sponsored Links
Advertisement
 
post #2 of 21 (permalink) Old 08-09-2010, 09:50 PM
Haters Gonna Hate
 
Fordfreak4life's Avatar
 
Join Date: Aug 2009
Location: Garden City, Ks
Posts: 5,869
Send a message via MSN to Fordfreak4life
Re: Wont start after taking out Hpop

unhook that fuel bowl heater then check your fuse 22 i believe, w/e the fuse is for the cig lighter

2004 F-350 CCSB DRW Sport Package..... something else to spend money on
Proud Supporter of Race For The Warriors
Fordfreak4life is offline  
post #3 of 21 (permalink) Old 08-09-2010, 09:53 PM
Super Hauler!
 
Super_Hauler's Avatar
 
Join Date: Nov 2008
Location: Ft. Collins, CO
Posts: 3,881
Re: Wont start after taking out Hpop

It may take a while of cranking to get her to fire over, did you fill the reservior? If not it will take even longer for the lpop to fill the hpop and fire up. Keep cranking

MINE:08 F-250 CCSB king ranch erics tunes livewire
99: sclb 6 speed, 4" lift,4" exhaust, EB
99 F-450: ccfb Boss v plow. 6 speed 5" ex,EB
1985 Peterbilt 359 Big cam III Tuned up a little
HERS:2001 F-350 ccsb notta stock!
Quote:
Originally Posted by prheitz View Post
I change my HPOP oil, the oil does circulate with the regular oil, it doesn't cycle as often and does get dirty sooner.
Super_Hauler is offline  
post #4 of 21 (permalink) Old 08-09-2010, 10:10 PM Thread Starter
PSN Local
 
TimmyNiewald11's Avatar
 
Join Date: Feb 2010
Location: Imperial, MO
Posts: 76
Re: Wont start after taking out Hpop

yes, i filled the reservior. and have cranked for about an hour all together
TimmyNiewald11 is offline  
post #5 of 21 (permalink) Old 08-10-2010, 12:27 AM
All done now
 
Arisley's Avatar
 
Join Date: Sep 2007
Location: Arlington, TX
Posts: 22,486
Re: Wont start after taking out Hpop

Charge your batteries. It takes hot batts to bust these things off. Even if it sounds like it is spinning over planty fast enough.

Early '99 F350 DRW, Excab, LB. Auto. 2WD, 2010 bed, 2005 headlights, 298K, on my way to 1000K.
H2E, 238 Hybrids, Adrenaline oil, Tuned by Tony. DIY Regulated Return.
Arisley is offline  
post #6 of 21 (permalink) Old 08-10-2010, 12:47 AM
I know nothing...
 
joedaddy's Avatar
 
Join Date: Apr 2009
Location: Gridley Ks.
Posts: 6,115
Re: Wont start after taking out Hpop

Are you getting any smoke?

Doesn't roll with anyone or tag along to be cool...
joedaddy is offline  
post #7 of 21 (permalink) Old 08-10-2010, 03:38 AM Thread Starter
PSN Local
 
TimmyNiewald11's Avatar
 
Join Date: Feb 2010
Location: Imperial, MO
Posts: 76
Re: Wont start after taking out Hpop

i have been putting the battery charger on it after everytime i crank so the batterys are fully charged everytime i try. But no there is no smoke when cranking.
TimmyNiewald11 is offline  
post #8 of 21 (permalink) Old 08-10-2010, 05:03 AM
PSN Local
 
mbg75's Avatar
 
Join Date: Oct 2008
Location: Long Island
Posts: 332
Re: Wont start after taking out Hpop

try the old cos

2002 F-250 ccsb, 7.3, Auto, 4x4, BDP Tunes, Stealth Drop In, 4" MBRP, 6637, Van turbo WW ATS, Frantz Bypass,Drilled & Slotted Rotors
mbg75 is offline  
post #9 of 21 (permalink) Old 08-10-2010, 05:11 AM
Busy Busy
 
Marty's Avatar
 
Join Date: Jul 2007
Location: Elkton, MD
Posts: 9,004
Re: Wont start after taking out Hpop

Check your ICP/IPR duty cycle while cranking.


Might have got debris in the IPR. It seems I have that issue on every motor I build.

443.553.9234 - 410.392.3262

Elkton, Maryland

2001 F250 Platinum - 11.62 @ 115.76 on Nitrous
2007 F250 - 10.916 @ 122.86 on Fuel
2005 F450 - Tow Bitch
Marty is offline  
post #10 of 21 (permalink) Old 08-10-2010, 08:52 PM Thread Starter
PSN Local
 
TimmyNiewald11's Avatar
 
Join Date: Feb 2010
Location: Imperial, MO
Posts: 76
Re: Wont start after taking out Hpop

Im still in the process of learning, so could ya please tell me how to check ICP/IPR duty cycle thanks for all the help everyone
TimmyNiewald11 is offline  
Reply
Gear in this thread - Powered by O'Reilly Auto Parts

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome