2002 F-350 SRW 4x4 Lariat Crew Cab, Auto, MBRP 4" T409 Turbo back, AFE Stage 2, Isspro gauges (Pyro, Boost, Trans), BTS VB, DP F-5 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. (No start, Modified Stock, 60T, 80E, 120race)
Democrats are tyrants.
Republicans are cowards.
Jesus Christ is our only hope!
What tank said, Dirvers side manifold, always want EGT readings PRE-TURBO, Dieselmanor is where i got my instructions for my gauge install. Just take your time drilling and tapping the manifold, best bet is usually to take the manifold off and do the work, but ive seen guys drill and tap with the manifold on, just used some grease on their drill bits. Someone please correct me if im wrong on this.
Per DieselManor, "The practice of coating your drill bits with grease is also a very bad idea. The flutes of a drill bit are designed to remove chips outward. By loading these flutes up with grease all you would be doing is making it more difficult for them to perform as designed. Also, grease will cause some of the shavings to stick on the inside of the manifold, making it difficult to remove later with a vacuum cleaner."