2003 f-350, strong batteries, 300k miles, no codes, no start.
The truck died the other day, and wouldn't start. For a couple of weeks it has been hard to start. I replaced the icp
because oil was leaking down the back of the engine, and it fired right up.
The truck ran for two days after the new icp
, then died the same way. Won't start. I put voltage to the ipr
and still nothing so we replaced the ipr
. When the old ipr
came out the screen was GONE!
After replacing the ipr
the truck still doesn't start. I pulled the ficm
and noticed that the connectors were loose, and will no longer clip, so i have to push them into place and have someone fire the truck. Still no start, but now it tries to start.
Anyone have an idea what this might be. I plan to do the ficm
test this evening, and take the voltage of the icp
. I checked for codes and found nothing.