FICM REPAIR KIT - PowerStrokeNation : Ford Powerstroke Diesel Forum
 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 08-17-2012, 05:32 PM Thread Starter
PSN Local
 
STOCK06's Avatar
 
Join Date: Nov 2011
Location: Knox, IN
Posts: 79
FICM REPAIR KIT

Does anyone know where to purchase a FICM repair kit?
STOCK06 is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 08-17-2012, 06:33 PM
Unmarked
 
Zmann's Avatar
 
Join Date: Nov 2010
Posts: 11,321
Re: FICM REPAIR KIT

like what a soldering gun and solder?

O6 King Ranch cc sb 8 inch lift ,37 Toyo's,Helo’s Edge Insight CTS guage only , Auber EGT , o8 center console , xm satellite ,coolant filter,RSX 9000 shocks,dual TGC dual steering stabilizers ,Viper , remote toolbox popper, High Idle mod , $ link Rize , ARP's, BPD EGR cooler, Fabtech traction bars, Tony's tune
Zmann is offline  
post #3 of 7 (permalink) Old 08-18-2012, 04:00 AM
Fuel it up again Dummy
 
Mhatlen's Avatar
 
Join Date: Jun 2012
Location: California Valley
Posts: 1,101
Send a message via MSN to Mhatlen
Re: FICM REPAIR KIT

Quote:
Originally Posted by Zmann View Post
like what a soldering gun and solder?
There are guys who have repaired ficm,s themselves not sure where they get the diodes and what have ya parts. I have one open now and I can tell you this: There are a million tiny tiny parts in those things. If you botch the job it may ruine it and you can have a problem having someone work on it much less warranty their work after you tried?

After saying that if you have needle tips for a soldering gun and are familiar with how to fix electronics on circuit boards go for it. I have seen a repair procedure on FTE.

2006 F250 Lariat CCSB 4X4, ARP Studs, O-Ringed heads Fass 125, Cat EC-1, IPR coolant filter, SCT Tuner w/PHP custom tow tune, Atlas40, Updated Turbo lines/stc/standpipes/D-plugs, DC Power 270 amp, 4" SS exhaust w/Corsa, Amp Steps, Die Hard AGM Platinums, Icon coils Carli/Deaver leafs 7" of lift, All on Fatty Daddy Toyo MT 38/15.50/18
47k miles
Mhatlen is offline  
post #4 of 7 (permalink) Old 08-18-2012, 03:29 PM
Unmarked
 
Zmann's Avatar
 
Join Date: Nov 2010
Posts: 11,321
Re: FICM REPAIR KIT

most guys re flow the solder on the power supply to repair them sinc cold solderr joints were the issue = no parts required

if you need a capacitor ETC most guys wouldn't know how to even test to see what one is bad ,,

there are a few articles on what to order to do a voltage upgrade but honestley by the time you order all the stuff you might as well send it off or buy a Bulletproof unit

no one touches the logic side when doing an upgrade or repair to the voltage so the million tiny parts isn't an issue IMHO

but yes if you botch it your looking for a new power supply because no one wants to wok on a DIY fail

O6 King Ranch cc sb 8 inch lift ,37 Toyo's,Helo’s Edge Insight CTS guage only , Auber EGT , o8 center console , xm satellite ,coolant filter,RSX 9000 shocks,dual TGC dual steering stabilizers ,Viper , remote toolbox popper, High Idle mod , $ link Rize , ARP's, BPD EGR cooler, Fabtech traction bars, Tony's tune
Zmann is offline  
post #5 of 7 (permalink) Old 08-23-2012, 02:09 AM Thread Starter
PSN Local
 
STOCK06's Avatar
 
Join Date: Nov 2011
Location: Knox, IN
Posts: 79
Re: FICM REPAIR KIT

Who does the best work? Not interested in voltage upgrade...waste of money for no gains IMO.
STOCK06 is offline  
post #6 of 7 (permalink) Old 08-23-2012, 04:32 AM
PSN Veteran
 
Join Date: Apr 2008
Posts: 2,524
Re: FICM REPAIR KIT

ficmrepair.com

Mark
06 F250 CC SB FX4 Lariat;ARPs OEM gaskets;Banks exhaust;DynaTrac Balljoints;RACCCV6000;Updated HPOP fitting;JimmiJammers;Ravelco;plugs&standpipes;Fumo to;Harpooned;Quadzilla XZT Fuel Press;Blue spring;DashDAQ;PHP_FICM; RiffRaff boots;DCPower270A XP;Inverter;Rancho7000's;BPD EGR cooler;BPD WaterPump;SCT Matts SRL+;ELC Ultra w/ filter;SynchroMax
bismic1 is offline  
post #7 of 7 (permalink) Old 08-23-2012, 04:45 AM
Unmarked
 
Zmann's Avatar
 
Join Date: Nov 2010
Posts: 11,321
Re: FICM REPAIR KIT

Quote:
Originally Posted by STOCK06 View Post
Who does the best work? Not interested in voltage upgrade...waste of money for no gains IMO.
your" gains" opinion isn't really supported with fact for some of the vendors options

and there is no "FICM repair KIT" not sure where you got that ?
it is a few bad solder joints and the articles are a plenty on the DIY repairs

ficmrepair.com is great for folks who want a PHP flash / voltage upgrade (you don't care for) or can't solder and need their OEM re soldered ,,because they do not want to try and then have a scrap power supply

with the 6 phase Bulletproof FICM

you get a choice of voltages you select after you receive it by selecting jumpers /or just stay stock


a triple redundancy ( yes a huge advantage ) ,, not to mention an all new improved power supply/heatsink/potting material and a company Who cares

they also do repairs to stock FICM's

O6 King Ranch cc sb 8 inch lift ,37 Toyo's,Helo’s Edge Insight CTS guage only , Auber EGT , o8 center console , xm satellite ,coolant filter,RSX 9000 shocks,dual TGC dual steering stabilizers ,Viper , remote toolbox popper, High Idle mod , $ link Rize , ARP's, BPD EGR cooler, Fabtech traction bars, Tony's tune
Zmann is offline  
Reply
Gear in this thread - Powered by O'Reilly Auto Parts

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the PowerStrokeNation : Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome